STUART MODELS

CALL FOR PRICES DEPENDENT ON RATE OF EXCHANGE

Stuart Models is the world's oldest company still producing model steam engines. The company's beginnings can be traced back to the late 1800s when Mr. Stuart Turner designed his now famous No. 1 engine. He drew up the patterns which were then sent away for casting, and on their return he proceeded to carefully "machine up" the parts and was soon showing the finished engine at local exhibitions.

Machine, Assemble, or just take out of the box and run. Stuart engines can be purchased as unmachined kits, machined kits ready to assemble, or complete finished engines.

Level 1 & 2 unmachined kits contain all the materials and fixings necessary to build the engine.

Level 3 & 4 unmachined kits are generally supplied with castings and fixings, but no bar stock.

Level 5 unmachined kits are either particularly complicated or require large machinery to complete.

Machined kits come with all components turned, milled, drilled and threaded allowing you to finish
the model with no more than a set of wrenches, a screwdriver, a selection of small files, and a paint brush.

Finished Engines are assembled, painted, tested, and "run in" on compressed air at the factory.

Sulphur Springs Steam Models, LLC. will initially be stocking some of the Level 1 unmachined and machined kits. All of the Stuart Models line of engines and power plants are available through Sulphur Springs Steam Models, LLC. as "Special Order" items.

Stuart Models Catalog: The complete line of Stuart Models including Stationary engines, Marine engines, boilers, Steam Plants, and more. SM-Catalog........$10.50 post paid.

Stuart 10V

The Stuart 10Vis the most popular of Stuart's range of engines. The attractive
design and the fact that it can be machined on a 3 1/2 in. lathe make it an ideal
project for the novice.

BORE: 3/4", STROKE: 3/4", FLYWHEEL: 3" HEIGHT: 5 7/8"

To assist the beginner the book "Building a Vertical Steam Engine" is available. It describes in detail the machining of all the components and is full of advice for the more challenging operations. PT-141.. $12.50

Stuart 10V casting kit. KESM-10VC......
Stuart 10V machined kit. KESM-10VM......

Stuart 10H

The Stuart 10H is a horizontal version of the very popular Stuart 10V.
It can be run from 200 -2000 RPM making it well suitable to driving other models, for example the Oil Field Pump or the Stuart dynamo.

This model is another good beginner project and can be successfully completed on a 3 1/2" lathe.

BORE: 3/4", STROKE: 3/4", FLYWHEEL: 3" Length: 6"
Stuart 10H casting kit. KESM-10HC......
Stuart 10H machined kit. KESM-10HM.....

Stuart D10

A double version of the popular 10V, the Stuart D10 is well suited to all kinds of stationary and marine work, being able to reach speeds of up to 2000 RPM. The engine is robust and not a great deal more difficult to build than the Stuart 10V.

With the addition of a disc flywheel, reverse gear, and boiler feed pump, the Stuart D10 can be made into a compact marine engine able to power a six foot steam launch.

BORE: 3/4" X 2, STROKE: 3/4", FLYWHEEL: 3" Height: 6"

Stuart D10 casting kit. KESM-D10C......

Stuart S50

The Stuart S50 is an elegant model of a typical Mill Engine as used in the North of England to power small factories throughout the 19th and early 20th centuries.
The Stuart S50 is another ideal "first time" model engineering project. The unmachined kit is supplied with a full set of castings together with all the materials, fixings and drawings needed to finish the model. A fully machined kit, ready to assemble is also available.

Stuart S50 casting kit. KESM-S50C......
Stuart S50 machined kit. KESM-S50M.....